Planet 99' From France
Mutema 06 Jun 2008
Hi everybody, i'm morgan, 22, who's stduying design ^^.
On April i've bought my bike, a cagiva planet 99' 14000km for 700 euros...
As you can see there's 2 Ducati multistrada mirrors....
But 3 weeks ago, the nightmare...
I've totally destroyed the motor.... Now i'm looking for another one, if you have one, send me an MP !
Messaggio modificato da Mutema il 11 April 2011 - 20:26
On April i've bought my bike, a cagiva planet 99' 14000km for 700 euros...
As you can see there's 2 Ducati multistrada mirrors....
But 3 weeks ago, the nightmare...
I've totally destroyed the motor.... Now i'm looking for another one, if you have one, send me an MP !
Messaggio modificato da Mutema il 11 April 2011 - 20:26
bamboocha 07 Jun 2008
you can't repair your engine?
repair your cylinder and buy a new piston
the reason of the crash?
repair your cylinder and buy a new piston
the reason of the crash?
:..Paul 88..: 07 Jun 2008
nice bike!!but terrible grippata!!!poor piston is destroy!!!!!!!!!!!!!!!!
Mutema 07 Jun 2008
Quite funny, the Slide stop screw of the carburetor taked down... So the mixture Debased violently
The cylinder is unrefurbishable, that's the reason while i'm looking for another 73037 (if somebody have one, send me an MP) !
For the piston i'll take a wossner i guess...
I'll change my exhaust i hope for this summer, a tecnigas RSG :
I've changed some stuff of it's back :
The cylinder is unrefurbishable, that's the reason while i'm looking for another 73037 (if somebody have one, send me an MP) !
For the piston i'll take a wossner i guess...
I'll change my exhaust i hope for this summer, a tecnigas RSG :
I've changed some stuff of it's back :
bamboocha 07 Jun 2008
that exhaust is horrible!
the member "mat" can find you the best exhaust for your engine, the cagiva exhaust of the mito sp year 1995, you can't find better
the member "mat" can find you the best exhaust for your engine, the cagiva exhaust of the mito sp year 1995, you can't find better
Cif 07 Jun 2008
The bike was sold the first time in italy! Look under the numberplate! Meccamoto Trignano!
Another piece of Italy in France, including the bike!
We all hope you'll re-build in a few time your Planet!
Bye, Cif!
Another piece of Italy in France, including the bike!
We all hope you'll re-build in a few time your Planet!
Bye, Cif!
Mutema 07 Jun 2008
i hope i'll found my 73037 on your market ^^ :fischietto:
The problem isn't to find pieces, but i'm a student so i'm not really rich....
i can't spend 500 euros for a complete new motor for example !
The exhaust for cagiva Sp fits for the other cylinders? interesting !
But i think i'ts quite expensive for me
The problem isn't to find pieces, but i'm a student so i'm not really rich....
i can't spend 500 euros for a complete new motor for example !
The exhaust for cagiva Sp fits for the other cylinders? interesting !
But i think i'ts quite expensive for me
steo89 07 Jun 2008
i don't like thay exhaust very much,but if you don't have much money you can try to search exhausts like arrow and giannelli or a seven speed exhaust,which is the exhaust of the old mito,from year 90 to 99,and it's quite good for your bike and not very expensive,i think that you can find what you need in our forum good luck
Messaggio modificato da steo89 il 07 June 2008 - 19:21
Messaggio modificato da steo89 il 07 June 2008 - 19:21
Mutema 14 Jun 2008
Little news, i've fixed my new tachometer ( the original doesn't work)
Cif 15 Jun 2008
bamboocha, il Jun 15 2008, 01:32 PM, ha scritto:
what's the reason of the damage on the engine?
L'ha detto, guarda:
Citazione
Quite funny, the Slide stop screw of the carburetor taked down... So the mixture Debased violently
The cylinder is unrefurbishable, that's the reason while i'm looking for another 73037 (if somebody have one, send me an MP) !
For the piston i'll take a wossner i guess...
The cylinder is unrefurbishable, that's the reason while i'm looking for another 73037 (if somebody have one, send me an MP) !
For the piston i'll take a wossner i guess...
Mutema when you'll buy a new cylinder and a new piston, check the carburetor before of taking another ride :fischietto:
Messaggio modificato da Cif il 15 June 2008 - 13:38
Mutema 09 Apr 2011
two years after ! Lots of things appened... I've repaired my engine, it works fine, and now with 7th gears
and for the technigas, i've aborted the idea... looking for something else.
I spend $$ for getting out the bearings, but it should have to check the crankshaft before... Totally dead !
on this picture the motor si still in 6th gear, i've changed after ( i've bought the table just for the rebuild of my engine ^^ )
I've also changed my front brake, for a nissin from a 650 raptor... IT F*** brakes !
Here you have my bike, with an Mito 1 pipe, which is now dead, that's the reason while i'm looking for another exhaust.
SO, next steps:
_ change brake pads ( front bought )
_ change brake lines ( in progress)
_ drain my fork( in progress )
_ find a new-old exhaust, cause mine is dead and HEAVY. I spend lot of time in subito.it ^^
_boyesen or vforce, depends of the exhaust founded
_keep 28mm or find 35mm, depends of the exhaust founded.
I have one question, where do you find brand new air filter? in france it's just impossible
To finish, i don't post a lot in your forum, but i spend a lot of time with google traduction for transletting hundreds of topic, cause here your have a real knowledge about cagiva !
and for the technigas, i've aborted the idea... looking for something else.
I spend $$ for getting out the bearings, but it should have to check the crankshaft before... Totally dead !
on this picture the motor si still in 6th gear, i've changed after ( i've bought the table just for the rebuild of my engine ^^ )
I've also changed my front brake, for a nissin from a 650 raptor... IT F*** brakes !
Here you have my bike, with an Mito 1 pipe, which is now dead, that's the reason while i'm looking for another exhaust.
SO, next steps:
_ change brake pads ( front bought )
_ change brake lines ( in progress)
_ drain my fork( in progress )
_ find a new-old exhaust, cause mine is dead and HEAVY. I spend lot of time in subito.it ^^
_boyesen or vforce, depends of the exhaust founded
_keep 28mm or find 35mm, depends of the exhaust founded.
I have one question, where do you find brand new air filter? in france it's just impossible
To finish, i don't post a lot in your forum, but i spend a lot of time with google traduction for transletting hundreds of topic, cause here your have a real knowledge about cagiva !
Mutema 10 Apr 2011
Thx, I'm trying to use OEM ducati or Cagiva parts, like my ducati multistrada's mirrors, i also had OEM rear blinkers, but i've lost them... I'm trying to find some ducati monster blinker to replace them.
You don't imagine how it's difficult to have a cagiva in france, there is no dealer/shop anymore, we can't even find a brand new airfilter ! We have to order in germany, Uk, italy...
the big thing to find now is my exhaust, the funny stuff is that i have money, but i don't find anything in france, or i have to sell one of my kidney to have a new one. For example, a complete new gianelli exhaust costs 380 euros.... LOL.
I'm trying to contact some persons on subito.it, but no answer , maybe cause i want to pay by paypal. And in the forum i think it's not very nice to spam every annunce why an " hello, i'm a french douchebag, and i'm interested by your exhaust..."
Wait and see !
You don't imagine how it's difficult to have a cagiva in france, there is no dealer/shop anymore, we can't even find a brand new airfilter ! We have to order in germany, Uk, italy...
the big thing to find now is my exhaust, the funny stuff is that i have money, but i don't find anything in france, or i have to sell one of my kidney to have a new one. For example, a complete new gianelli exhaust costs 380 euros.... LOL.
I'm trying to contact some persons on subito.it, but no answer , maybe cause i want to pay by paypal. And in the forum i think it's not very nice to spam every annunce why an " hello, i'm a french douchebag, and i'm interested by your exhaust..."
Wait and see !
Mutema 21 Apr 2011
this is a video of my speedometer, when i bought the bike the original was dead,
so i bought a koso and i have intergrated it with some alumiunium plate.
you have the result here, http://www.dailymotion.com/video/x5yskf_co...auto#from=embed
i also asked mat for an exhaust, 310 euros shipped... a little bit expensive, and, before all, is it a good idea to have a crc pipe on a 28mm + double ring piston???
i have another question, that i didn't found, lots of guys here are talking about the 32 vhsa, but does it fit with the 28mm manifold?
Messaggio modificato da Mutema il 21 April 2011 - 21:41
so i bought a koso and i have intergrated it with some alumiunium plate.
you have the result here, http://www.dailymotion.com/video/x5yskf_co...auto#from=embed
i also asked mat for an exhaust, 310 euros shipped... a little bit expensive, and, before all, is it a good idea to have a crc pipe on a 28mm + double ring piston???
i have another question, that i didn't found, lots of guys here are talking about the 32 vhsa, but does it fit with the 28mm manifold?
Messaggio modificato da Mutema il 21 April 2011 - 21:41
nelson22 22 Apr 2011
the 32 vhsa fits in the original 28mm mainfold, actually i'm using it nice bike! i like it!